Epson Stylus Pro 9890 of the A0+ forma

The large-format A0+ printer for printing of photos, reproductions and coloring tests

The new generation of large-format Epson Stylus Pro 7890 printers (24 inches) and Epson Stylus Pro 9890 (44 inches) represent the devices which collected in themselves the latest technological achievements.

• Epson UltraChrome K3 Vivid Magenta ink - 9 cartridges with pigmental ink
• The broadest color coverage
• Printing on sheet and rolled carriers up to 44 inches wide (1118 mm)
• Printing head of Thin Film Piezo (TFP) with 8 channels
• Thin printing head 1 inch wide with 360 nozzles on the canal
• Autoswitching between the black cartridges which are at the same time set standard and opaque
• Control of a meniscus for exact positioning of a drop
• Special covering of a printing head for prevention of a contamination of nozzles
• Printing by drops of the variable size, the minimum size of a drop 3,5 pl and resolution is 2880 x 1440 dpi for excellent photographic printing quality
• Possibility of use of management system in the color - the additional spectrophotometer
• The low cost of operation thanks to separate cartridges of 350 and 700 ml

New quality standard

The new generation of large-format Epson Stylus Pro 7890 printers (24 inches) and Epson Stylus Pro 9890 (44 inches) represent the devices which collected in themselves the latest technological achievements.

Combination of a technological printing head of MicroPiezo TFP™ with magnificent quality of pigmental Epson UltraChrome® K3 Vivid Magenta ink guarantee the highest level of printing. And the high performance and convenience of work will allow to use effectively the printer for a wide range of tasks.

Printing head of Thin Film Piezo (TFP) with 8 channels

Representing new revolutionary technology of a printing head MicroPiezo® TFP™, the Epson company offers the new level of drawing drops of ink on paper for excellent photographic quality.

• Specially developed new printing head on technology maykropyezo
• High resolution, high speed with a one-inch printing head with 360 nozzles on the canal
• Use of 8 channels for ink at the same time
• Control of a meniscus for an exact form of a drop and its positioning on paper
• Special covering of a head for prevention of a contamination of nozzles
• Printing by drops of the variable size with the minimum drop 3,5 pl for a high-speed quality printing
• Automatic check of a status of nozzles: The built-in sensor quickly checks a status of nozzles, without demanding printing of a template, and automatically cleans if it is necessary

Technology of Epson UltraChrome K3™ Vivid Magenta ink

Epson UltraChrome™ K3 Vivid Magenta ink - the eight-color pigmental ink of new generation setting the standard of professional printing - both color, and black-and-white.

• New formula of high density pigmental ink of purple and light-purple flowers for increase in color coverage - especially in blue and red
• The new Microcrystal Encapulation™ technology for receiving a plain surface of a print
• Professional grade of printing
• Increase in protection against scratches
• Almost instant stabilization of color after printing
• The increased optical density for transfer of details in shadows - to 2.6 Dmax (L *=3.0 *)
• The broad color coverage exceeding coverage of classical silver printing

Technology of printing by three neutral shades:

• At the same time used black, gray and light gray ink
• The improved balance gray without color aberrations
• Impressive transfer in average tones, suites and shadows with thin gradation
• Minimization of effects of a metamerizm and bronzing
• Process of support of the special ICC profiles (for Windows and Macintosh)

* For Epson Premium Luster Photo Paper paper

Epson PreciseColor™ technology

To guarantee constant quality against a copy to a copy of a model range of printers of the Stylus Pro series, process of production includes a stage of colorimetric calibration for each copy.

• Guarantee of stable quality of a color rendition of each copy of the printer of the Epson Stylus Pro series
• The user does not have need to calibrate the printer independently
• Check and setup of operation of each printer at a production phase

Automatic alignment of a printing head

• It is used in all printers of the Epson Stylus Pro printers series.
• The built-in sensor in the printer provides the unsurpassed accuracy and automatic process of alignment of a head for each of channels
• It is applied for one - and bidirectional the printing modes

Three neutral colors

• Use of ink black, gray (50% of black) and light gray (25% of black) flowers
• Much the improved balance gray without color aberrations
• The most exact tone transitions, smooth gradation in suites and shadows
• Minimization of effects of a bronzing and metamerizm
• The improved process of management of color with new ICC profiles for Windows and Mac (ICM™ and ColorSync™)

Two cartridges with different black ink

Using two at the same time set a cartridge with opaque and standard black ink, printers of the Epson Stylus Pro x890 series give to the user an opportunity of optimum use of the modes of black, guaranteeing fine quality and printing density on carriers of different types. The new technology of a printing head Epson MicroPiezo TFP allows to switch automatically between use of one of black cartridges. The cartridge with standard black ink can be used for any carriers for receiving professional results. However for printing on such Epson carriers as, for example, Velvet Fine Art, Enhanced Matte and UltraSmooth Fine Art, use of a cartridge with opaque ink will help to increase considerably optical density for the best quality of a print.

• Two modes of printing black for opaque and glossy carriers
• Depending on the carrier selected in the driver the printer automatically will select what black ink needs to be used
• The optimized optical density of different type, black for carriers, to improve quality of a print

Intellectual system of work with cartridges

• New technology of cartridges for guaranteed reliable work
• 8 separate cartridges with a capacity of 350 and 700 ml
• "Hot" replacement of cartridges for improvement of productivity of work

Work with carriers

• Compatibility practically with all types of carriers, rolled and sheet, from the Letter format before printing 44 inches wide
• Automatic switching of use of continuous and sheet paper
• Exact loading of sheet carriers, including a cardboard up to 1,5 mm thick
• Identification of the carrier the printer and the driver and synchronization of these data for an exception of errors of the user
• Printing without fields on sheet and rolled carriers
• Convenient basket for reception of prints

Paper loading

• Bezvalovy loading of a continuous stationery
• The convenient configured holders for rolls with cores 2-or 3 of inches
• The lever of level of a standard tension for the simple and fast fixing loaded papers
• Technology of loading of Epson ePlaten™ carriers:
• Accurate automatic loading of carriers of different types
• Electronic control of rewind and unloading of paper

Carrier expense monitoring system

• The roll expense counter in real time
• Printing a code stroke with information on type of the carrier and the remained amount of paper in a roll

New system of a cut of carriers

• The reliable disk cutting torch which is almost not demanding service
• High speed of a cut - a roll up to 44 inches wide cut for several seconds
• The new system of a cut excludes pollution of the carrier
• Possibility of a cut of the most different carriers, including canvases and art carriers

High performance

New printing head do Epson Stylus Pro 9890 and 9890 printers by one of the fastest large-format printers.

Printing mode	16" x 20"	20" x 30"
Fine - 720 dpi 'Production Mode	1 min. 53 sec.	4 min. 03 sec.
SuperFine - 1440 dpi HS *	2 min. 53 sec.	5 min. 03 sec.
SuperFine - 1440 dpi HS *	3 min. 47 sec.	6 min. 39 sec.
SuperPhoto - 2880 dpi HS *	7 min. 14 sec.	12 min. 52 sec.

* HS = Mode of printing High-Speed (bidirectional)
Production Mode = HS + Super MicroWeave 'Off'

Convenient frontal control bar

• ZhK a control bar with diagonal 2,5 inches for convenient viewing of the status of the printer and access to the menu of management
• Buttons for execution of basic functions
• Built-in light indication

Epson SpectroProofer™ 44"

The additional high-performance spectrophotometer developed together with X-Rite® for the improved management system in the color.

• Simple and convenient frontal installation on the printer
• Management system in the color on the basis of the high-performance X-Rite ILS20 spectrophotometer for correct measurements with an accuracy below 0.2 dE94
• Versions with and without UV filter
• The black and white replaced substrates
• The built-in drying for measurement process acceleration
• The built-in temperature sensor for the internal mechanism and environment
• Support via the raster processors RIP of third-party vendors

Convenience of connection

• Standard interfaces of connection - USB 2.0 port and one network port 10/100 BaseT Ethernet
• Professional Epson drivers for Macintosh® and Windows®
• Support of RIP of third-party vendors