- Country of manufactureRussia
Manual winch ЛР - 15, code: 51053Full description
After completing the work on tensioning the self - supporting insulated wire or fiber - optic cable, it must be securely fixed to each support. Rolling rollers are used only for pulling wires, and the cable should not be left on the rollers. For these purposes, a capture is used - a frog. This tool is suspended from hooks instead of rollers and the wire is clamped in it. It is used to adjust the cable sag when installing a self - supporting insulated wire. For this tool, we can use a cable from 4 to 22 mm. The "Frog" tension tool is easy to install and dismantle, made of high - strength steel and withstands loads up to 2 tons.
Manual winch ЛР - 15 is used for installation and tensioning of self - supporting insulated wires and fiber - optic cables.
Allows you to rearrange the self - supporting insulated wire from the mounting roller to the supporting and anchor clamps.
- Friction - ratchet mechanism with a switch providing step tension and recoil
- Two modes of operation: with block and without block
- Increased flexibility of the rope
- Three hooks
|Cable diameter d, mm||4.8|
|Cable length with / without block, m||1.66 / 3.0|
|Maximum tractive effort with / without block, t||1.5 / 0.75|
|Rated tractive effort with / without block, t||1.0 / 0.5|
More details on the website : http://install-ltd.ru