Hydraulic FAAC 400CBAC electric drive

The hydraulic FAAC electric drive 400svasprednaznachen for automation of industrial oar gate with width of shutter up to 2,2 m is also expected high operation rate. Among FAAC 400 hydraulic drives possesses the best characteristics of towing capacity. The drive is mounted to cloth of gate and column by means of two brackets. The electric pump sets in motion the hydraulic piston connected to shutter of gate thanks to what it opens and closed. The manual unblocking is carried out by means of the built-in lock releaser. For operation of the drive on gate mechanical emphasis should be established.

Advantages:

• protection of hydraulic locks of the drive against breakdown;
• reliable fixing of gate in closed position;
• high safety of use thanks to availability of hydraulic system of protection on effort;
• connection of the drive to payment of management is carried out by means of one three-conductor cable;
• at blackout of collar open manually by means of the built-in lock releaser;
• possibility of connection of additional safety controls and radio control.

• 
  

TECHNICAL DATAS
Power voltage	230 V of +6% of-10% 50 Hz
Power consumption	220 W
The consumed current	1 A
Speed	1400 RPM
Heat protection	120 ºС
Line speed of rod	1 cm/sec.
Working length of rod	260 mm
Towing capacity	6200 N
Max. width of shutter	2,2 m
Hydraulic lock	2
Oil pumping speed	1 l/min
Protection class	IP55
Operating temperature range	from-40 to +55 °C
Weight	8,6 kg