- Country of manufactureUkraine
- Type of jackScrew
- Load-lift capacity120 Ton
The jack diesel DT with electric management, is intended for raising of locomotives, electric locomotives, passenger and commodity cars, refrigerator cars, railway tanks of all types at repair and service of the rolling stock, and also when replacing carts in points of shift. Also are used for a complete set of the stationary domkratny UDS-120 and UDS-160 installations.
Jacks diesel DT-30 and DT-40 are delivered in the form of a set from 4 pieces of domkratny racks with the general case of management and individual control panels. The set of jacks is completed with a case of management of ESKG-91.001.07 jacks with the multipurpose program relay. Degree of protection of a case of management conforms to requirements of IP56 in accordance with GOST 14254-96. Jacks are supplied with light indication of current state. Jacks diesel DT-30 and DT-40 do not demand fastening to the base. The mass of the lifted part: DT-30 - no more than 120 tons; DT-40 - no more than 160 tons.
Design of jacks - screw with a rectangular carving on the screw and a bronze nut at the minimum and maximum height of raising of a konechnik with optimum distribution of load of basic nuts. The screw samoustanavlivatsya in vertical position that increases reliability and loading capacity. The electromechanical design of the lifting mechanism is simple is reliable. There is a possibility of joint and separate work of domkratny racks with management of any jack from a case of management; a possibility of the emergency stop of jacks from individual control panels, and also automatic power off of jacks at achievement of extreme provisions.
Technical characteristics of railway diesel (locomotive) jacks of DT-30 and DT-40:
|Loading capacity of a domkratny rack, t||30||40|
|General loading capacity of a set (4 domkratny racks), t||120||160|
|Speed of rise, m/min||0,3||0,285|
|Possible height of rise, mm||905-2035||880-2600|
|Time of full rise, min.||5,8||9,2|
|Departure of a sliding trunk from an axis of the cargo screw, mm:
|Engine capacity, kW||5,5 (7,5)||7,5|
|Overall dimensions, mm||1450х1300х2550||1450х1300х3450|
|Mass of a set, kg||7040||7600|
Also we can offer you the wide range of accessories and spare parts to this type of the equipment.