- Country of manufactureUkraine
Bladed mixers of boring solutions and pulps
The mixer of a pulp is intended for mechanical hashing and maintenance in suspension of chemically neutral hydromixes (pulps) with a density up to 1500 kg/m ³, containing firm inclusions by fineness to 2 mm, in the tanks installed in a chain of technological process at concentrating factories.
The mixer of drilling mud fluid is intended for mechanical hashing of boring solutions, solutions of reagents and other liquids with a density up to 2200 kg/m ³ in tanks with a capacity up to 40 m ³ and up to 2200 mm high, for the purpose of prevention of formation of a deposit. Mixers can be operated in the room or under a canopy at a temperature of air from 0 to 40 °C.
Our company makes metal mixers of any type according to drawings of the customer.
Hashing happens to the help of the rotating mixers - the impeller set in motion by the electric motor connected to a worm or wave reducer via the elastic coupling. Mixers on the speed of rotation of impeller divide on high-speed and low-speed.
The drive of a mixer is installed on the frame strengthened on boards of a metal, wooden or reinforced concrete tub by base bolts. The pipe of mixers connects to the drive by means of the rigid coupling and bolts. The shaft of a mixer is established strictly vertically. The shaft with the mixer fixed on its end is connected by the rigid coupling to the intermediate shaft rotating in two ball-bearings installed in the case. The lower end of a shaft of mixers can have an additional support - a thrust bearing which fastens to a tub bottom bolts.
By request of the consumer mixers can be usual and acidproof execution, with a tub or without it. Also can be equipped with the pipeline system for air supply and drain branch pipes.
LLC Company Plazma has the productive base equipped with the modern metalworking and thermal equipment and also qualified engineering and personnel.
LLC Company Plazma is one of the leading suppliers of the metallurgical and concentrating equipment of various types. If you need to design or make a mixer, a cyclone or a crusher, contact our experts, and obtain more detailed information.