Currency AZN
MOTUL 8100 ECO-CLEAN 5W-30 engine oil buy in Baku
Buy MOTUL 8100 ECO-CLEAN 5W-30 engine oil
MOTUL 8100 ECO-CLEAN 5W-30 engine oil
motornoe_maslo_motul_8100_eco_clean_5w_30

MOTUL 8100 ECO-CLEAN 5W-30 engine oil

In stock
Reconfirm the price with seller
Shipping:
Seller
Azerbaijan, Baku
(View map)
+994 
Display phones
Technical characteristics
  • BrandMotul
  • Country of manufactureFrance
  • Type of oilSynthetic
Description
8100 ECO-CLEAN 5W-30 C2
ENGINE OIL FOR PETROL AND DIESEL ENGINES.
100% SYNTHETIC.

Application

Hi-tech 100% synthetic energy saving engine oil. It is specially developed for the cars of the last generation equipped with petrol and diesel engines including with direct injection, meeting the requirements of norms of Euro IV and Euro V and demanding use of oil of the ACEA C2 standard in them: oils with low high-temperature viscosity of HTHS (less than 3,5 mPa/s), the reduced content of sulphatic ashes (0,8%), phosphorus (0.07%-0.09%), are gray (0.3%) - "Mid SAPS". Compatibly to all types of petrol and diesel engines in which use of energy saving oil is provided: ACEA C2 or A5/B5 standards. Oil has approvals of PSA B71 2290 from PEUGEOT CITROEN AUTOMOBILE and RN0700 from
Renault.Sovmestimo with catalytic converters and black filters of system of purification of exhaust gases. Some engines are not intended for use in them this type of oils therefore before use of this product it is necessary to be verified with the operation manual on the car.
Characteristics
Standards:

ACEA C2, API SM/CF
Approvals:
PSA B71 2290, No. RN0700-10-19 Renault RN0700
Conforms to requirements:
FIAT 9.55535-S1 - TOYOTA - HONDA - SUBARU
The engines meeting the requirements of standards of Euro IV and Euro V are equipped with very sensitive system of tertiary treatment of exhaust gases. Sulfur and phosphorus complicate functioning of the catalytic converter and can damage honeycombs that leads to inefficient tertiary treatment of exhaust gases. Sulphatic ashes hammer the black filter that in the
the turn leads to reduction of a cycle of regeneration of the filter, the increased fuel consumption and loss of engine capacity.
This standard is suitable for all petrol and diesel cars of PSA concern (including the cars equipped with black DPF filters).
Recommendations about application
Replacement of oil is made according to recommendations of the producer of the engine. Not to mix with oils which do not meet standard of C2.

Physical and chemical properties

Class of viscosity, SAE J 300: 5W-30
Density at 20 °C (68 °F), ASTM D1298: 0,845 g/cm3
Viscosity at 40 °C (104 °F), ASTM D445: 57,9 mm2 / with
Viscosity at 100 °C (212 °F), ASTM D445: 10,4 mm2 / with
Viscosity of HTHS at 150 °C (302 °F), ASTM D4741 3.0 mpa.s
Index of viscosity, ASTM D2270: 171
Temperature of hardening, ASTM D97: -42 °C / -44 °F
Temperature of flash, ASTM D92: 232 °C / 450 °F
Sulphatic ash-content, weight % ASTM D874 0,80
Alkaline number, ASTM D2896: 8,0 mg of KOH/g


Contact the seller
MOTUL 8100 ECO-CLEAN 5W-30 engine oil
MOTUL 8100 ECO-CLEAN 5W-30 engine oil
Shipping method
Compare0
ClearSelected items: 0