MOTUL 8100 X-CLEAN 5W-40 engine oil
- Customer pickup,
- Courier
- In detail
- BrandMotul
- Country of manufactureFrance
- Type of oilSynthetic
ENGINE OIL FOR PETROL
AND DIESEL ENGINES OF THE STANDARD OF EURO IV AND EURO V.
100% SYNTHETIC.
Application
for petrol and diesel engines of the cars of the last generation equipped with a turbo-supercharging and direct
injection, engines of the norms of Euro IV meeting the requirements and Euro V and demanding use of oil of the ACEA C3 standard in them:
oils with high viscosity of HTHS (more than 3.5 mPa/s), the reduced content of sulphatic ashes (0,8%), phosphorus (0.07%-0.09%), are gray
(0.3%) - "Mid SAPS". Compatibly to catalytic converters and black filters (DPF).
Before application it is necessary to study the operation manual on the car.
Standards:
Approvals:
BMW Long Life 04, Ford WSS M2C 917A, GM-OPEL dexos2TM (replaces GM-LL-A-025 and B-025) No GB2B0325011, MB 229.51,
Porsche A40, VW 502 00-505 00-505 01, Renault RN0710 N ° RN0710-08-012, Renault RN0700 N ° RN0700-08-018,
Recommendations:
KIA/HYUNDAI, HONDA, MITSUBISHI, NISSAN, SUZUKI, SSANGYONG, …
Recommendations about application
Replacement is made according to recommendations of equipment manufacturer.
Not to mix with oils which do not meet standard of ACEA C3.
Before application it is necessary to study the operation manual on the car.
Physical and chemical properties
Class of viscosity, SAE J 300: 5W-40
Density at 20 °C (68 °F), ASTM D1298: 0,845 g/cm3
Viscosity at 40 °C (104 °F), ASTM D445: 84,7 mm2 / with
Viscosity at 100 °C (212 °F), ASTM D445: 14,1 mm2 / with
Viscosity of HTHS at 150 °C (302 °F), ASTM D4741 3,6 mpa.s
Index of viscosity, ASTM D2270: 172
Temperature of hardening, ASTM D97: -39 °C/-38,2 °F
Temperature of flash, ASTM D92: 234 °C / 453,2 °F
Sulphatic ash-content, weight % ASTM D874 0,80
Alkaline number, ASTM D2896: 7,5 mg of KOH/g