- Type sprinklerRotary (rotating)
Professional watering head of rotor type (the rotating spraying part) with great opportunities intended for an irrigation of open territories of the small, average and big size
If you want to design system of automatic watering or to modernize old - I - 10/I - 20 is that sprinkler which is necessary to you. Any other watering head of this class has no such potential. Along with traditional simplicity in control and service, other opportunities of simpler models of this family of rotors, I - 20 possesses the strengthened spring ensuring no-failure operation of the moving-forward part and also the built-in locking valve and the strengthened case. One more advantage of this model is a variety mounted snuffled: standard, highly account, nozzles of a low corner and short radius. These sprinklers are also equipped with the new FloStop system ® which features allow to disconnect without effort a concrete sprinkler one turn of an assembly key at any time. Besides, I - 20 are issued also with the moving-forward bar made of stainless steel.
Special rubber cap
Does not allow to get into the sprinkler case to foreign particles (soil, sand, etc.) that provides non-failure operation in work and low wear of working surfaces.
22 various nozzles (a stream trajectory from 18 ° to 47 °)
Provide fitness of a sprinkler to features of a landscape
Will allow to disconnect any sprinkler simple turn of an assembly key at any time.
The arch of rotation of a stream (watering sector) regulated from 40 to 360 degrees or unregulated by 360 degrees
The located above a sprinkler, easily available, adjusting groove allows without efforts to adjust watering sector at any time, even during watering.
The gear drive checked for years with water greasing
In the first this mechanism used more than 20 years ago and continuously improved will provide the long term of operation.
Especially powerful spring
Ensures no-failure operation of the moving-forward part.
The strengthened locking valve mounted at plant
Prevents infiltration of water through a sprinkler after completion of watering. It is necessary for work of system in the conditions of a height difference.